Tesvor M1

If you’re looking for a hassle-free cleaning that will let you set schedules, manage your robot through an app or possibly let you operate it through voice control, you might want to check out the Tesvor M1.
It is armed with a maximum run-time of 150 minutes and can both sweep and mop your floors. With a power suction of 4,000 Pa, this vacuum robot removes everything in its path—dust, dirt, crumbs, pet hair, and more—making sure that no mess is left behind.

Battery

The Tesvor M1 comes with a Li-ion battery that has a battery capacity of 5,200 mAh. It can do its cleaning straight for 150 minutes, while it takes approximately 6 hours to recharge. Once the robot’s battery is low or it is done with its cleaning task, it will automatically return to its dock to recharge so that it will be ready for the next cleaning.

Cleaning

When it comes to cleaning, the Tesvor M1 has a cleaning area of 1,593 square feet. Its suction power is 4,000 Pa.

There are four cleaning modes that you can easily adjust through the app: night mode (quiet), normal, high performance, and maximum power. In the “night (quiet)” mode, the robot can run for 150 minutes, while in “normal” mode, it can run for up to 120 minutes.

The Tesvor M1 comes with a barrier-cross height of 0. 59 inches. From hard floors to tiles and medium to high carpets, the robot can easily navigate its way around your place. It will clean its way around your home so that no dust, dirt, or debris gets left behind.

It has a dustbin capacity of over 20 oz and a HEPA filter that is helpful for households where some people might have allergies or asthma.

After sweeping and vacuuming, you can have the robot mop up your floor. It has a water tank capacity of a little less than 12 oz.

Functions

When the robot’s battery is low, it will automatically dock and recharge until it gets to 100%. You also have the ability to schedule the robot’s cleaning through its app or remote control.

If you have a smart home and want to integrate the robot into your system, you can do so with the help of Amazon Alexa or Google Home. This allows you to give the robot voice commands so that you can operate it hands-free for a quicker, more efficient cleaning time.

App

Through the app (compatible with both Android and iOS), it’s easy for you to track the robot in real time. You can also customize or set cleaning schedules and monitor all cleaning sessions. You can also use the app to select and switch between the four cleaning modes that the robot has. The app also lets you see if the dustbin is already full and needs to be dumped before the robot can clean again.

Navigation

The Tesvor M1 has a gyroscope mapping sensor. When cleaning your place, it will scan the room and create the most efficient cleaning pattern. It cleans in an s-shaped path to avoid missed spots.

It also comes with a cliff sensor that can easily detect ledges and stairs so you don’t have to worry about it falling off and getting damaged. It also has anti-collision sensors that will protect your furniture from getting scratched.

If you need to stop your robot from entering a room, or you need it to clean only a certain spot, you can use the magnetic tape which will serve as boundary markers for your robot.

Attachments

This product comes with a remote control to help you manually start, stop, and control the robot.

Design

The shape of the Tesvor M1 is round and it comes with two side brushes. Its edges have durable bumpers so it doesn’t break or get damaged easily.

Other

The sound level of the robot is 80 decibels.

Dimensions and weight

The height of the Tesvor M1 is 3.50 inches and its width is 13.78 inches. It weights 9.6 lbs.